Using the self-cleaning cycle, How the cycle works, Before you start – Whirlpool FES310Y User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING THE SELF-CLEANING CYCLE

Using The Self-Cleaning

Cycle

In This Section

Page

Page

How the cycle works............. .............21

Setting the controls.............. ..............22

Before you start.................... .............21

Special tips.......................... ..............24

The Self-Cleaning cycle saves you from the toil and mess that often come with hand-cleaning
the oven interior. Like with the other functions of your range, you operate the Self-Cleaning
cycle with the easy-to-use controls. Please review the instructions in this section to keep your
oven spotless.

How the cycle works

The Self-Cleaning cycle uses very high heat to
burn away soil and grease. During the cycle,
the oven gets much hotter than it does for

normal baking or broiling. This high heat breaks
up the soil or grease and burns it away.

You can adjust the cycle time to the amount

of soil in your oven. You can set the cycle time
anywhere between 2 and 4 hours. (See “Set­
ting the controls” on page 22.)

The graph at the right is representative of a

normal, 3-hour Self-Cleaning cycle. Note that

the heating stops when the 3-hour setting is up,
but it takes longer for the oven to cool enough
to unlock.

Before you start

Before you start the Self-Cleaning cycle,
make sure you:

• Hand-clean the areas shown.

They do not

get hot enough during the cleaning cycle for
soil to burn away.

Use

hot water and

detergent or a soapy steel-wool pad for
cleaning.

NOTE:

DO NOT clean, move or bend the

seal. Poor cleaning, baking and roasting
may result.

Time In Hours

STOP

21

Advertising