Using your refrigerator, Setting the controls, Changing the control settings – Whirlpool ED20PK User Manual
Page 5: Questions, Exterior moisture control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using your refrigerator
FREEZER CONTROL REFRIGERATOR CONTROL EXTERIOR MOISTURE CONTROL LIGHT SWITCH
Setting the controls...
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
1. Set the REFRIGERA
TOR CONTROL To 3.
2. Set the FREEZER
CONTROL TO B.
Give the refrigerator time to cooi down com-
pieteiy before adding food. (This may take sev
eral hours.)
These settings should be about right for nor-
mai househoid refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream is
firm.
Changing the control settings...
If yau need to adjust temperatures in retrigerator
or treezer, use the settings listed in the chart belaw.
CONDITION:
REASON:
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
RECOMMENDED
CONTROL SETTINGS:
QUESTIONS?
...call your
COOL-LINE"
service
assistance
telephone
number
(page 16).
It Refrigerator
Section is
TOO WARM
Door opened often
Large amount of food added
Room temperature too warm
Refrigerator
Freezer
4
A
It Freezer
Door opened often
Refrigerator
3
Section is
TOO WARM
Large amount of food added
Very cald room temperature
(can't cycle often enough)
Freezer
C
If Refrigerator
Controls not set correctly
Refrigerator
2
Section is
TOO COLD
tor your conditions
Freezer
B
If ICE isn't
Heavy ice usage
Refrigerator
3
MADE FAST ENOUGH Very cold room temperature
(can't cycle often enough)
Freezer
C
If BOTH SECTIONS
Door opened often
Refrigerator
4
are TOO WARM
Large amount of food added
Very warm or very cold
room temperatures
Freezer
B
Exterior Moisture Control
The Exterior Moisture Control an the Central
Console operates electric heaters around the
door openings. These heaters help keep moisture
from forming on the outside of the refrigerator.
1. Use the "OFF" setting when humidity is low.
2. Use the "ON” setting if moisture forms on the out
side of the refrigerator.
EXTERIOR
MOISTURE
CONTROL