Whirlpool ED20PK - Manual (Page 6)

Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
Adjusting the refrigerator shelves...
To remove glass shelves:
1
. Tiit up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1 . Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing the crispei; meat drawer and covers...
To remove the crisper and meat drawer:
1. Slide crisper and meatdrawerstraightouttothe
stop, lift drawer, then slide the rest of the way out.
2. Replace in reverse order.
To remove the covers:
1. Push up crisper cover glass insert from bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Repeat for meat drawer cover.
To replace the covers:
1
. Fit back of meat drawer cover in notch supports
on walls of refrigerator, then lower into place.
2. Repeat for crisper cover frame.
3. Slide back of crisper cover glass insert into
place, then lower front.
OUT TO THE STOP,
LIFT THE FRONT
AND PULL AGAIN.
REMOVE THE
GLASS INSERT,
THE FRAME FRONT,
THEN THE BACK.
GLASS IS HEAVY
BE CAREFUL.
1
Adjusting meat drawer temperature.
USE CONTROL TO ADJUST
MEAT DRAWER TEMPERATURES
Cold air flows against the meat drawer through
an opening between the freezer and the refrigera­
tor. This helps keep the meat drawer colder than
the rest of the refrigerator.
Slide the control to let more or less cold air
through.
Removing freezer bin...
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
To remove the bln:
1. Slide bin out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bln:
1. Place bin on the slides.
2. Make sure the stops clear the front of the slides.
3. Slide bin in.