Installing your air conditioner, General information, Location – Whirlpool 3PACH21DD0 User Manual
Page 16: Clearance, Shmi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
SHmi
Installing Your
Air Conditioner
In This Section
Page
Page
General information.................. ............... 16 Installation procedure.......................
.............. 18
General information
Location
Your air conditioner will work well in any
location. However, the preferred location for
the unit is on a wall out of direct sunlight.
The location should also provide:
• Adequate support for the weight of the
unit.
• An electrical outlet within reach of the
power supply cord.
• Free movement of air to the room(s) to
be cooled.
• Free movement of air to the air intake
louvers (inside and outside).
The power supply
cord can be fed
through either side
of the front panei.
Electricai outiet must be avaiiabie within
reach of the power supply cord. DO NOT
use an extension cord.
Clearance
• Keep outside air intake louvers clear.
Front
cover
• If the wall is too thick, cut the wall back on
a 45° angle if possible.
• Allow sufficient clearance around the sides
and rear of the unit.
120 mm
120 mm
minimum
ciearance
* minimum
clearance
350 mm
minimum
clearance
1 6