Operating instructions, Starting your washer – Whirlpool LPR4231A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
Starting your washer
Be sure to measure and add detergent, then place a sorted load In the washer
before starting it.
1. Select a load size
For model LPR6244A:
• Turn the knob to point at a setting
that describes the size of load you
want to wash.
• The knob can be set anywhere on or
between EX SMALL (a few small
items) and LARGE (a full load).
NOTE:
For best washing results,
items should move freely in the
washer. Do not overload the washer
or choose a water level that is too low
for your wash load.
For best results with permanent
press clothes, use the LARGE water
level.
Reduce wash time when using the
EX SMALL water level setting. Loads
with only a few small items need less
wash time for best results.
For model LPR4231A:
Load size water level selection is not
available on this model. The water
level is preset for a full fill.
* •
2. Select water temperature
For models LPR4231A and
LPR6244A with permanent or two
faucet water connection:
• Match the water temperature to the
type of fabric and soils being
washed.
• The top temperature is the wash
selection and the bottom tempera
ture is the rinse selection.
NOTE:
Use warm wash water with the
PERMANENT PRESS or GENTLE
KNITS cycles.
For heavily soiled permanent press
or knit clothes, prewash or pre-soak
before washing in warm water.
ALWAYS use cold rinse water for
permanent press fabrics.