Cleaning the dryer window, Awarning – Whirlpool LT7004XV User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/663222/20/background.png)
Lint Removal and Cleaning
Continued
Heat Inlet
duct
Electrical
supply
Clean lint gathered inside the dryer.
Lint can gather inside the dryer and
create a FIRE HAZARD. This lint
should be removed at least every
2 to 3 years, or more often,
depending on dryer usage.
AWARNING
Electrical Shock and
Personal Injury Hazard
• Unplug the power supply cord
or turn off the electrical power
before lint removal.
• Do not put hands inside the
cabinet.
• Make sure the dryer is cool.
• More than one person is
required to lift, tilt or move the
washer/dryer because of its
weight and size.
Failure to do so could result in
electrical shock, injury or
damage.
Cleaning shouid be done only by a
qualified person.
1. Unplug unit from electrical supply
or turn off electrical power.
2. Remove back panel from dryer.
3. Avoid touching wires and thermostats
4. Remove lint from boxed-in area with
a soft brush or vacuum cleaner.
5. Replace back panel, reconnect and
level the Thin Twin.
Cleaning the dryer window
Use spray glass cleaner and a soft
cloth when cleaning the window in the
dryer door.
• Make sure the dryer is cool.
• Follow directions provided with the
cleaner.
• Wash, rinse and dry well.
NOTE; See the Laundry Guide for
additional cleaning information.
20