Using the automatic ice maker, On some models) – Whirlpool FREEZERS User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING YOUR REFRIGERATOR

Using the automatic ice maker

(on some models)

Here are a few things you will want to know

about your automatic ice maker:
• The ON/OFF lever is a wire signal arm.

DOWN to make ice automatically.
UP to shut off the ice maker.

NOTE: Do not turn ice maker on until it is
connected to the water supply. Instruc­
tions for ice maker water supply hook­
up are attached to the back of the

refrigerator cabinet.

• It is normal for ice crescents to be attached

by a corner. They break apart easily.

• The ice maker will not operate until the

freezer is cold enough to make ice. This
can take overnight.

• If ice is not being made fast enough and

more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a
day and, if necessary, turn the Freezer
Control toward C.

• Good water quality is important for good

ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from a
malfunctioning softener) can damage the
ice maker mold and lead to poor ice quality.
If a softened water supply cannot be
avoided, make sure the water softener is
operating properly and is well maintained.

UP to

stop ice

maker.

DOWN to

start ice

maker.

15

Advertising