Select wash time, Restart the nasher – Whirlpool LA4400XS User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
C.
start the washer by pulling out
the Control Knob. The washer
will fill to the level you set with
wash water of the selected tem
perature. After filling, stop the
washer and select wash time.
D.
To stop the washer at any time,
push in the Control Knob. To
restart the washer, pull out the
Control Knob.
Select WASH TIME;
3«
Restart the nasher
A.
stop on a number in the cycle
you want. The numbers are min
utes of wash time. The drawing
shows 6 minutes of agitation in
the REGULAR NORMAL Cycle.
B.
Restart the washer by pulling
out the Control Knob.
Advertising