Whirlpool Ell8DK - Manual (Page 6)

Using Your Refrigerator
Continued
EXTERIOR
MOISTURE
CONTROL
Exterior moisture control
The Exterior Moisture Control on the Control
Console operates electric heaters around the door
openings. These heaters help keep moisture Irom
forming on the outside of the refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Glass shelves are
heavy. Be careful.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots in the
shelf supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Adjusting the door bins
To remove door bins:
1. Lift up bin.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired button.
2. Push down until it stops.
Adjusting the shelf glides
The shelf glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along guide.
Shelf glide cannot be removed.