Whirlpool 3363834 - Manual (Page 5)

Operating Your Washer
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information. Page references are included for more information.
Starting Your Washer
1. Add measured detergent to the
washer. Then place a sorted load of
clothes in the washer. See page 13.
• If desired, you may also add colour safe
bleach.
2. (OPTIONAL STEP) Add measured
fabric softener to the fabric softener
dispenser. See page 11.
3. Ciose the washer lid.
4. Turn the Load Size Seiector to the
setting that corresponds with the size
of your wash ioad and the type of
fabric being washed.
• See pages 13 and 14 for loading tips.
• To change the load size setting after the
washer has started to fill, move the
Selector to the desired new setting.
NOTE: If your washer has RESET on the
Load Size Selector, change the load size
selection by first moving the Selector to
RESET, then to the new load size.
Fabric softener
dispenser
Knob Selector
OR
Large
Knob Selector with
“Reset”
5. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperature with the type of
fabric and soils being washed.
• Your washer has one of the Water
Temperature Selectors shown; rotary
knob or push-button.
• The top temperature is wash water;
bottom temperature is rinse water.
• See page 15 for water temperature tips.
Knob Selector
OR
Push-button Selector
continued on next page
5