Stopping/restarting your washer – Whirlpool 3363834 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
6. (OPTIONAL STEP) On models with the
Extra Rinse Option, set the selector to
On to add an additional rinse and spin
to the end of the wash cycle.
• Use the Extra Rinse Option when
adding extra detergent for the Super
Wash cycle or for the Regular and
Permanent Press cycles.
Knob Selector
7. Push in Cycle Control Knob and turn it
ciockwise to the wash cycle you want.
8. Pull out Cycle Control Knob to start
washer.
9. (OPTIONAL STEP) Add measured
liquid chlorine bleach to the wash
water. See page 11.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if
necessary) and pull out the Cycle
Control Knob.