Càmnc for your rance, Clianinc chart, For y – Whirlpool FGS335E User Manual

Page 20: Àmnc, Ance, Awarning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

C

àmnc

FOR Y

our

R

ance

Your range is designed so you can care for it easily. You can do most cleaning with items
found around your home. Cleaning your range whenever spills or soiling occurs will help to

keep it looking and working like new.

AWARNING

Explosion Hazard

Do not store flammable materials such as gasoline near the cooktop.

Doing so can result in death, explosion, fire, or burns.

CliANINC CHART

Use this chart to get specific information on cleaning your range. Before cleaning, always make sure all
controls are off and the range is cool.

PART

HOW TO CLEAN

Control knobs

1. Turn the knobs off and pull them straight away from the control panel.

2. Wash the knobs with a sponge and warm, soapy water. Rinse and dry

them well. Do not soak them. Do not use steel wool or gritty cleansers,
which can damage the finish of the knobs.

3. Replace the knobs. Make sure all knobs are turned off.

Control panel

e

Wash the panel with a sponge and warm, soapy water. Wipe the panel with
clean water and dry it well. Do not use steel wool or gritty cleansers,

which can damage the finish.

OR

e

Wash the panel with a paper towel and spray glass cleaner. Do not spray
the cleaner directly on the panel. Apply the cleaner to the paper towel.

Exterior surfaces
(other than control
panel)

e

Wash with a sponge and warm, soapy water. Wipe with clean water and

dry well.

• Use a nonabrasive, plastic scrubbing pad on heavily soiled areas.

• Do not use gritty or harsh cleansers, which can damage the finish.

NOTE: Do not let foods containing acids (such as vinegar, tomato, or lemon

juice) remain on the surface. Acids may remove the glossy finish. Also, wipe

up milk or egg spills when the cooktop is cool. Be careful when cleaning
around the model and serial number plate; too much scrubbing could
remove the numbers.

Surface burner
grates

• Wash the grates with a nonabrasive plastic scrubbing pad and warm, soapy

water. Rinse and dry well. For stubborn stains, ciean with a scrubbing

pad and/or a powdered cleanser and water. Repeat these cleaning steps

as needed.

20

Advertising