Self-oeaninc your oven, Uchis flash, Ooking – Whirlpool FGS335E User Manual

Page 26: Results, Ndicator

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING

W

hen

SElf-OEANINC YOUR OVEN

PROBLEM

CAUSE

The Self-Cleaning cycle
will not work

• You did not turn the oven control knob to CLEAN.

• The door is not closed all the way.

C

ooking

results

PROBLEM

CAUSE

Cooking results are
not what you expected

• The oven temperature seems too low or too high. See “Adjusting the oven

temperature control” on page 12 to adjust the oven temperature.

• You did not preheat the oven before baking (if called for in the recipe).

• The recipe you are using may need to be altered to improve the taste or

appearance of the food.

• You are using a pan that is not the correct type or size. Refer to a reliable

cookbook or recipe for the recommended pan type and size.

• There is not enough air space around the pan when baking. Allow 1V

2

to 2

inches of air space on all sides of the pan.

• The flame size does not fit the cookware being used.

• When broiling, you have not completely closed the oven door.

• The flow of combustion and/or ventilation air to the range is blocked. Make

sure nothing is blocking the middle front of the backguard.

• The range is not level. (See the Installation Instructions.)

I

ndicator

ucHis FLASH

PROBLEM

CAUSE

The oven on and heating

indicator lights flash

• You can not bake, broil, or clean. Call for service. (See “If You Need

Assistance or Service” on page 27.)

The heating and door

locked/cieaning indicator
lights flash

• The door lock has failed. Call for service. (See "If You Need Assistance

or Service” on page 27.)

If none of these items are causing your problem, see “Requesting Assistance or Service” on page 27.

26

Advertising