Operating instructions, Select a load size, Starting your washer – Whirlpool 4LA6300XX User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
Starting your washer
Be sure to measure and add detergent, then place a sorted load in the washer
before starting it.
ENERGY SAVING
TEMPERATURE SELECTOR
1. Select a load size
• Turn the knob to point at a setting that
describes the size of load you want to
wash.
• The knob can be set anywhere on or
between EX SMALL (a few small
items) and LARGE (a full load).
NOTE: For best washing results, items
should move freely in the washer. Do
not overload the washer or choose a
water level that is too low for your wash
load.
For best results with permanent
press clothes, use the LARGE water
level.
Reduce wash time when using the
EX SMALL water level setting. Loads
with only a few small items need less
wash time for best results.
•
2. Select water temperature
• Match the water temperature to the
type of fabric and soils being washed.
• The top temperature is the wash
selection and the bottom temperature
is the rinse selection.
NOTE: Use warm wash water with the
PERMANENT PRESS or KNITS
GENTLE Cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or pre-soak
before washing in warm water.
ALWAYS use cold rinse water for
permanent press fabrics.