Washer installation, Portable one-faucet connection, Warning – Whirlpool CCW5264EW0 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Washer Installation
Use this section to help you install your compact washer. If you need assistance, call our
Consumer Assistance Center, 1-800-253-1301, from anywhere in the U.S.A.
Portable one-faucet connection
NOTE: Make sure the lid is closed before
moving the washer.
• Use the hose connector provided with the
washer for a one-faucet connection.
• Set the Temperature Selector to
WarmA/Varm or to Warm/Cold.
• Attach the hose connector to the faucet
adapter by pulling down on the locking
collar while lifting up on the connector until
it snaps into place.
• Slowly turn the water faucet on all the way.
^WARNING
Faucet adapter
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
• Pull the electrical power cord from the
storage area in the back of the washer.
Plug the power cord into a 3-prong
grounded outlet.
Water temperature adjustment:
Adjust water temperature as follows:
• Wash Water: Adjust faucets for wash
water temperature prior to the fill for wash.
continued on next page
5