Push the start/pause button to start – Whirlpool CCW5264EW0 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
5. Turn the Water Level selector to the
setting that corresponds with the size
of your wash load.
• To change the Water Level setting after
the washer has started to fill, turn the
selector to the desired new setting.
6. Select a wash-rinse temperature with
the Temperature selector. Match the
water temperature with the type of
fabric and soils being washed.
• See page 18 for water temperature
guidelines.
• Set the Temperature Selector to
Warm/Warm or to Warm/Cold.
Water temperature adjustment:
Adjust water temperature as follows:
• Wash water: Adjust faucets for wash
temperature prior to the fill for wash.
• Rinse water: Adjust faucets for rinse
temperature prior to the fill for rinse.
7. Turn Cycle Selector Knob to the
desired setting. See page 10.
8. Push the Start/Pause button to start
washer.
• The Cycle Selector Knob will NOT
rotate as the cycle progresses.
• The Cycle Status lights indicate the
operation being performed within
the cycle.
• When the cycle is complete, all Cycle
Status lights will be Off.
NOTE: Once a cycle has been started, the
Cycle Selector Knob MUST be turned to Off
before a new cycle can be selected.
WASH O