Other operating instructions, Rinse and spin, Extra rinse option – Whirlpool 6LA58OOXT User Manual

Page 10: Drain and spin, Operating instructions, Rinse and spin extra rinse option drain and spin

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

other Operating Instructions

REGULAR CYCLE

EXTRA RINSE

Rinse and spin

When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and
spin.

1. Push Cycle Control Knob in.
2. Turn clockwise to one of the dots on

the dial, as illustrated.

3. Pull Cycle Control Knob out. The

washer will fill to selected level,

agitate 2 minutes, drain and spin.

Extra rinse option

You can automatically add an extra

rinse and spin to the REGULAR Cycle,
using the extra rinse option.

• Flip the Extra Rinse switch to the ON

position before the REGULAR Cycle
starts. The washer will automatically
go to an extra rinse and spin after the
REGULAR Cycle is completed.

• If no extra rinse and spin is wanted in

the REGULAR Cycle, switch to the
OFF position. The Cycle Control Knob
will then stop at the end of the

REGULAR Cycle, before reaching the

dot on the washer dial.

For an extra rinse in other cycles, see

“Rinse and spin.”

Drain and spin

A drain and spin may help shorten
drying times for some heavy fabrics or
special-care items by removing excess
water.
1. Push Cycle Control Knob in.
2. Turn clockwise to any bar just before

an OFF area on the dial, as illustrated.

3. Pull Cycle Control Knob out. The

washer will drain and spin.

10

Advertising