Winterizing – Whirlpool LA6150XS User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Service or performance problems caused by the use of any product not
manufactured by Whirlpool Corporation are the responsibility of the manufacturer
of that product.
Winterizing
Because some water stays in the washer,
freezing can cause a lot of damage. If your
washer is stored or moved during the cold
weather...
1. Shut off both water
faucets. Disconnect
and drain water inlet
hoses.
2. Put a quart of R.Y
or automobile type
antifreeze in the
basket.
3. Set the washer for a
DRAIN and SPIN (see
page 8). Let it run for
about 30 seconds
to mix the antifreeze
and water.
To use the washer again...
1. Flush water pipes and hoses.
2. Connect hoses to the washer.
3. Turn on the water faucets.
4. Run the water
through a com
plete cycle with
one cup of deter
gent to clean out
the antifreeze.
10