Select a water level, Load sizes and water levels, Operating instructions – Whirlpool LA6150XS User Manual
Page 4: Starting your washer, Level, R cycle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
operating instructions
Starting Your Washer
Be sure to measure and add detergent,
then place a sorted load in the washer
betöre starting it.
WATER LEVEL
WATER SAVING
1
.
Select a WATER LEVEL
EX
SMALL
MEDIUM
Q
^ LEVEL
• Turn the knob to point to a setting that
describes the size of the load you want
to wash.
• The water level can be set for EX SMALL
(a few items), MEDIUM or LARGE (a full
load).
2
.
Select a CYCLE
HOT WARM COLD
KNITS
GENTLE
RM)
(WARM)
r CYCLE
ENERGY SAVING
• Each cycle has preset wash and rinse
water temperatures. (See pages 6 & 7
for more information.)
• All rinses are cold.
Recommended wash temperatures can
be found in your “Laundry Guide.”
NOTE: Use the LARGE water level for
best permanent press results.
IMPORTANT: Use warm water with
the PERM’T PRESS or KNITS GENTLE
cycles. For heavily soiled perma
nent press or knit clothes, pre-wash
or pre-soak before washing in
warm water.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely in
the water. Too big a load or too
little water can cause wear or tear
ing of load items.
‘Approximate
till with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE (17.3 gals./65.5 L)‘
MEDIUM (13.4 gals./50.8L)‘
EX SMALL (9.5 gals./36.0 L)‘