Whirlpool 7LSC9245BN0R - Manual (Page 9)

O P E R A T I N G Y O U R W A S H E R
8. (OPTIONAL STEP) If desired, select
Extra Rinse “On” to add an additional
rinse to the end of the wash cycle.
• Depending on your washer model, you
may have either a pushbutton or
CLEAN TOUCH^*« Extra Rinse
Selector.
• Use the Extra Rinse option when using
extra detergent for the Super Wash
cycle or any of the following cycles:
Heavy, Permanent Press, or Delicate.
The Bdra Rinse option is not offered in
the Regular cycle.
• Before a cycle starts, select Extra Rinse
“On”. The washer automatically adds an
extra rinse and spin to the cycle.
• If you do not want an extra rinse and
spin, or if you are using the Regular
cycle, select Extra Rinse “Off".
NOTE: On CLEAN TOUCH models, the
“On” indicator lights when Extra Rinse
is selected.
9. Push in and turn the Cycle Control
Knob clockwise. Stop when the indica­
tor on the outer ring points to the
number in the wash cycle you want.
• The numbers are minutes of wash time.
• The cycles are described on page 10.
Stopping/restaiting your washer
If necessary, you can stop your washer
during a cycle to add more clothes.
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if
necessary) and pull out the Cycle
Control Kriob.