Starting your msher, Select a, Select a 2 – Whirlpool LA61OOXS User Manual

Page 4: Cycle, Load sizes and water levels, Water level

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Starting your msher

Before starting

your washer:

1.

Measure and add detergent.

2.

Place sorted load in washer.

3.

Start washer.

EX MEDIUM

SMALL

I

LARGE

>c:x

water level

water saving

^ Select a

1

.

WATER LEVEL

Turn the knob to point to a setting that

describes the size of the load you want

to wash.
The water level can be set for EX SMALL
(a few items), MEDIUM or LARGE (a full

load).

Select a

2

.

CYCLE

REGULAR

HOT WARM COLD

■■ilH

PERM’T

PRESS

WARM

l!

KNITS *

,E

• Each cycle has preset wash and rinse

water temperatures. (See pages 6 & 7
for more information.)

• All rinses are cold.

Recommended wash temperatures can
be found in your “Laundry Guide.”

NOTE: Use the LARGE water level for
best permanent press results.

IMPORTANT: Use warm water with

the PERM’T PRESS or KNITS GENTLE

cycles. For heavily soiled perma­
nent press or knit clothes, pre-wash

or pre-soak before washing in

warm water.

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely in

the water. Too big a load or too

little water can cause wear or tear­
ing of load items.

‘Approximate

fill with load.

CAUTION:

DO NOT

OVERLOAD WASHER.

LARGE (17.3 gals./65.5 L)*

MEDIUM (13.4 gals./50.8L)*
EX SMALL (9.5 gals./36.0L)*

Advertising