Coleman INSTASTARI 9933 - Manual (Page 5)

English-4
CAUTION
• SERVICE SAFETY
• Keep all connections and fittings clean.
Inspect propane cylinder and skillet propane
connections for damage before attaching.
• During set up, check all connections and fit-
tings for leaks using soapy water. Never use a
flame. Bubbles indicate a leak. Check that the
connection is not cross-threaded and that it is
tight. Perform another leak check. If there is
still a leak, remove the cylinder and contact
Coleman for service or repairs.
• Use as a cooking appliance only. Never alter
in any way or use with any device or part not
expressly approved by Coleman.
• Clean skillet frequently to avoid grease accu-
mulation and possible grease fires.
To Set Up
Technical
Characteristics
Input: 8,000 BTU/H
Category: Pressure regulated propane
Fuel: 16.4 oz. disposable propane cylinders
Regulator: 9933
■ Remove components from carton. (Fig. 1)
Fig. 1
Fig. 3
■ Assemble feet to
skillet. Attach each
foot to skillet using
one screw. (Fig. 2)
NOTE: Screwdriver
is not provided.
■ Assemble handle to skillet lid using two screws.
(Fig 3)
Fig. 2
Fig. 5
■ Turn off regulator
valve. (Fig. 5)
Fig. 4
■ Install cooking surface (Fig. 4)
Fig. 6
■ Firmly snap regulator into skillet. (Fig. 6)
Fig. 7
■ Remove plastic cap from top of propane bottle and
screw propane bottle into regulator hand tight. (Fig. 7)