Coleman INSTASTARI 9933 - Manual (Page 7)

English-6
INSTASTART™
Electronic Ignition Skillet
■ Set on sturdy, flat surface. For outdoor use only.
■ Open regulator valve and push igniter button
repeatedly until burner lights. (Fig. 12 and 13)
Note: If igniter fails to light skillet, use match to
light burner. If the skillet is wet the ignitor may not
spark.
Fig. 11
Fig. 12
■ Adjust flame with
regulator valve.
(Fig. 14)
Fig. 14
Fig. 13
■ A good flame should be blue with minimal
yellow tip. Some yellow tips on flames are
acceptable as long as no carbon or soot
deposits appear. (Fig. 15)
G OOD
Yellow Blue
Holes in Burner
Blue
Yellow
B AD
Fig. 15
Tips Before Cooking
CAUTION
DO NOT place a pot or a pan on skillet surface.
Damage will occur and void the warranty.
■ Skillet has a nonstick coating. Use only non-
metallic utensils to prolong life of nonstick coating.
■ To reduce sticking and improve clean-up,
spray cooking surface with vegetable oil prior
to lighting skillet.
To Turn Off
Fig. 17
■ Turn off
regulator
valve.
(Fig. 17)
■ Make sure skillet is cool.
■ Move skillet away from flame (including pilot
lights) and other ignition sources.
■ Remove propane cylinder from regulator and
replace protective cap on cylinder. (Fig. 18)
■ Remove regulator from skillet. (Fig. 19)
To Clean
Fig. 18 Fig. 19
Fig. 20
■ Wipe clean with soft cloth and mild dish deter-
gent. Do not use abrasives. (Fig. 20)
■ For storage or
transport,
regulator may
be located
below cooking
surface. (Fig. 21
and Fig. 22)
Fig. 21
Fig. 22
NOTE: If the burner flame is accidentally
extinguished, turn off the regulator valve
and wait 5 minutes before relighting
the appliance.