CDA RV 1060 - Manual (Page 30)

30
+8 mm
+8
0
mm
+35 mm
V
A
B
Assembling the Backguard
Before installing the cooker, assemble the backguard V (fig. 27).
Please note that :
– The backguard V can be found packed at the rear of the
cooker.
– Before assembling remove any protective film/adhesive tape.
– The backguard must be fixed to the cooktop using the three
supports B and screws A supplied with the appliance (see fig.
27).
Levelling the Cooker
The cooker is equipped with 4 levelling feet and may be levelled by screwing or unscrewing the feet with
a spanner (fig. 28).
It is important to observe the prescriptions of figures 28a - 28b.
Fig. 28
Fig. 28a
Fig. 28b
Fig. 27