CDA RV 1060 - Manual (Page 8)

8
How to Use the Vitroceramic Hob
The ceramic surface of the hob allows a fast transmission of heat
in the vertical direction, from the heating elements underneath
the ceramic glass to the pans sat on it.
The heat does not spread in the horizontal direction, so that the
glass stays “cool” at only a few centimeters from the cooking
plate.
The 5 cooking plates are shown by painted disks on the ceramic
surface.
Important Note:
The heating elements incorporate a thermolimiter that switches
the element ON/OFF during all the settings to protect the
ceramic glass from overheating.
The use of incorrect pans and/or wrong pan positioning will cause
the temperature limiter to operate more frequently, resulting in a
reduction of cooking performance.
3-Circuit Radiant Zones
Incorporating 3 heating elements (fig. 4) you can control and light
up all 3 together or separately by selecting from the 6 positions
on the control knob (fig. 5).
The working temperature required is reached in a very short
time.
Fig. 4
Fig. 5