Casio CDP-220R - Manual (Page 43)

English
Using Auto Accompaniment
E-41
■ Using Synchro Start
Use the following procedure to configure the Digital Piano to
start Auto Accompaniment play as soon as you press a
keyboard key.
1.
Press
6
.
This enters accompaniment start standby.
2.
Play a chord on the keyboard.
This will start full part accompaniment (normal).
Any of the following operations can be performed while in
synchro standby to start a non-normal pattern.
• To start with intro pattern, press
3
.
• To start with variation pattern play, press
5
.
Use the following procedure to change Auto Accompaniment
speed to a level that suits you.
1.
Press
9
.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing w and q at the same time will initialize the
tempo setting in accordance with the currently selected
rhythm.
• While the tempo value is flashing, you also can use
br
(10-key) to change it.
• If you do not perform any operation for a few seconds
after the tempo setting screen appears, the display will
return to the screen displayed before you pressed
9
.
Use the following procedure to adjust the balance between
what you are playing on the keyboard and the volume of the
Auto Accompaniment.
1.
Press
ck
(FUNCTION) and then use the
br
(10-key) [4] (U) and [6] (I) keys to display
“AcompVol” (page E-7).
2.
Use the
br
(10-key) [–] and [+] keys to adjust
the accompaniment volume.
With One-Touch Preset, the Digital Piano automatically
configures optimal tone, tempo, and other settings in
accordance with the rhythm pattern you select.
1.
Hold down
bo
(RHYTHM) until the current tone
screen appears on the display.
This will automatically apply the One-Touch Preset
settings in accordance with the rhythm pattern that is
currently selected.
2.
Play a chord on the keyboard.
This will start accompaniment automatically.
Changing Auto Accompaniment Speed
(Tempo)
Flashes
Flashes
Adjusting the Accompaniment Volume
Using One-Touch Preset
A c o m p V o l