Casio CDP-220R - Manual (Page 62)

Using a Memory Card
E-60
Use the following procedure to save Digital Piano data to a
memory card.
1.
On the Digital Piano, select the data you want to
save as described below.
• You cannot save a user song (song data loaded from
an external device) to a memory card.
• See page E-58 for information about data types.
2.
Insert a memory card into the Digital Piano’s
card slot.
3.
Hold down
bq
until the screen shown below
appears on the display.
• To cancel data save, press
bq
again.
4.
Use the
br
(10-key) [4] (U) and [6] (I) keys to
display one of the settings shown below.
• You also could use [–] and [+].
Saving a recording made while playing along with a built-in
song in SMF 0 format will save only what was played on the
keyboard.
5.
Press the
br
(10-key) [9] (ENTER) key.
• Enter the file name of the data you are saving. Use the
br
(10-key) [4] (U) and [6] (I) keys to move the cursor
to the character you want to change, and then use [+]
and [–] to change the character.
• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).
6.
Press the
br
(10-key) [9] (ENTER) key.
This will save the data to the memory card.
• If there is a file with the same name already on the
memory card, a message will appear asking if you want
to overwrite it. Press the
br (10-key) [+] (YES) key to
overwrite, or [–] (NO) or [7] (EXIT) to cancel.
Saving Digital Piano Data to a
Memory Card
To save this type
of data
Do this
Sampled sound Select the tone number of the sampled
sound you want to save.
User rhythm Select the rhythm number of the user
rhythm you want to save.
Recorded song Select the song you want to save and
put the Digital Piano in playback
standby.
Registration data
Select one of the Digital Piano’s default
built in tones or rhythms.
All data
To save this data Display this screen
Sampled sound “SAv” “SmplTone”
User rhythm “SAv” “UserRhy.”
Recorded song “SAv” “Rec.Song”
Recorded song
(SMF 0 format)
“SAv” “SMF 0”
Registration data “SAv” “Regist.”
All data “SAv” “All Data”
U S E R N A M E
Flashes
C o m p l e t e
R e p l a c e ?