Vermont Casting ICVCTK02 - Manual (Page 9)

9
Inspire Electric Fireplace
10009472
Care and Cleaning
Always disconnect the appliance from the main power
supply and allow to cool before any cleaning operation
begins.
Metal painted parts may be cleaned using a clean,
damp cloth. Never use any abrasive cleaners and
chemical agents as these may damage the paint finish.
Maintenance
WARNING
Before carrying out any maintenance, ensure the
appliance is disconnected from the main power
supply. If in doubt, seek the assistance of a quali-
fied technician.
It is advisable to use genuine CFM Corporation replace-
ment parts available from your authorized dealer.
Light Bulb Replacement
1. Disconnect the appliance from the main power sup-
ply.
2. Remove the decorative trim assembly.
3. Remove the pebbles and ember bed.
4. Remove the removable panel by unscrewing the four
(4) screws. (Fig. 6)
5. Remove the colored filter from the bulb and unscrew
the bulb from its housing. (Fig. 7)
6. Install the new 20W light bulb.
7. Reassemble in reverse order.
������
�����������
����
Light Bulb
Light Bulb
Color Film
FP1643
Fig. 7 Remove color film and remove light bulbs.
������
���������������
����
Fig. 6 Removable panel.
Removable Panel
FP1640
Remove Screws