GE 29831 - Manual (Page 15)

INSTALLATION - WALL MOUNT
e
ISi iiliiiiliiiliiiiii;
t tl
(5 i
. ^
.......... J ©i
C. Installation for Wall Mount Use
1 Install the Batteries
Open the battery cover located under the
handset and number directory with a
screwdriver.
Insert 4 AAA Alkaline Batteries paying attention
to the polarity in the holder and replace the
cover. The black ribbon goes under the
batteries. Leave the end exposed to allow easy
removal when batteries need to be replaced.
2. Reverse the Handset Hook
Firmly slide the HANDSET HOOK out of the
cradle. Rotate it 180'" and slide it back into the
cradle.
3. Remove the Base Plate
For wall mount installations,
- Press in the two tabs and pull the BASE
PLA TE from the back of the telephone.
Note: For future reference, please copy your 3-digit security code
located on the back of the unit.
PRESS IN
TABS
4. Connect the Power Cord
Insert the right angle plug of the POWER
CORD into the POWER JACK on the back of
the telephone.
Note: Do not plug Power Supply into wall outlet
until all other steps are completed.
Note: During power outages the Answering system will not function
even though batteries are installed. The telephone, however, will
remain operational. The backup batteries will retain your
announcement and messages, and clock for over 24 hours.
12