GE 29831 - Manual (Page 17)

A.
Introduction
TELEPHONE
OPERATION
The GE Model 2-9831 Answerphone provides normal telephone
operation along with storage of up to twelve telephone numbers in
memory for automatic dialing of frequently called or emergency
numbers.
B.
Important
Features
to Note
—^
O
1. Pulse/Tone Switch
The PULSE/TONE switch located on the side of the unit should be
set to the proper position. The switch should be set to TONE if you
have “touch tone” service. Otherwise, set to PULSE.
Note: If one has a pulse service, the switch may be changed to
TONE after a call is made. This allows access to phone services
that require a tone. Return switch to PULSE when call is
completed.
2. Ringer Volume
The RINGER VOLUME svj'\tct\ located on the side of the unit can
be set to the following:
Hi - Maximum Volume
Lo - Lower Volume
Off - Ringer is not heard
3. Line In Use Status Light w\\\ indicate the following:
SOLID RED - Telephone or extension is in use or answerer is
taking a call.
SLOW BLINKING RED - A call is on hold.
C. How to
Make and
Receive
Calls
To Make A Call:
1. Pick up HANDSET.
2. Wait for dial tone.
3. Dial telephone number.
4. When finished, hang up.
To Receive a Call:
1. When phone rings, pick up HANDSET and talk.
2. When finished, hang-up HANDSET.
D.
How to Use
Automatic
Redial
O
o
H i D l A L
O
The telephone automatically remembers the last number dialed
(up to 16 digits long). This number will remain in redial memory until
another number is dialed.
To Redial Last Number:
1. Pick up HANDSET.
2. Wait for dial tone.
3. Press REDIAL.
14