Kenmore 911.46565 - Manual (Page 26)

save you time aad money, befOT^ making a seivice call, check the list below
for any problem you may feel you have with the performance of your range. If
the pfoblem is something you cannot repair, use the Consumer Service ^ ^
Numbers located at the back of this manual. When makinig any calls, have
the Moclel No., Repair list. Use and Care Manual and the
Date of: .Rurchase - availahle.-;
RROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The'; display ^of ^
your control Is
flashing “F”
followed by a
number or
letter."';
Range malfunction. Press the CLEAR/pEF pad. Let the
range cool for 1 hour and place
the range back Into an oven
operation. If the problem repeats,
call for service.
Range will not
woiic; tcdally
inoparativia'-. V.":.
No power to range. a- Check the household circuit
breaker or fuse box. ^ ^ ^ ^ ^
b. Check to make sure the range
Foods do not a. Improper rack or a. Maintain uniform air space
bake properly. pan placement. around pans and utensils, See
oven cookina tibs section
b. Oven vent
blocked or
b. Keep vent clear. L u ^
covered,
c. Improper use c. Racks should not be covered
of foil. during baking.
d- Improper d. Reduce temperature 25
degrees for glass or dull/
utensil used,
e. Recipe not
darkened pans,
e. Check recipe and ^ ^ ^ ^
followed. measurerpent.
f. Improper oven
control
f. Check the temperature
adjustment following this
calibration. section.
g. Range and oven g. Check the installation
rack not level.
, 26
Instructions for leveling.