Clarity INT9 - Manual (Page 26)

INT9 A/D converter 5 Troubleshooting
5 Troubleshooting
If you will not find your answers here, use the www.dataapex.com website
where the Support menu will navigate you to frequently asked questions
(FAQ), Clarity email conference archive or contact to DataApex helpdesk.
5.1 Locate your problem
When troubles occur, the fastest way to find a solution for it is to search for
it in the following index via the Dialog (window), in which the problem
occurred, Error Messages that appear or according to utilized Hardware.
The name of the window/dialog is visible in its header.
Note: Names of individual Clarity Instruments appear in the header instead of
the common term “Instrument”.
Tab 2: List of windows and dialogs
Dialogs
Clarity pg 37.
Data Acquisition pg 39.
Instrument pg 37.
Method Setup pg 37.
Sequence pg 37.
Single Analysis pg 37.
System Configuration pg 23., pg 37., pg 39.
Tab 3: List of Error messages
Error Messages
Board malfunction pg 23.
Cannot create detector pg 23.
Cannot find driver file ... pg 23.
Cannot find first board pg 23.
Cannot find second board pg 23.
Disabled (in the status line) pg 37.
Error Occurred During Setup pg 23.
Simulated (in Data Acquisition) pg 39.
Note: To find solutions for error messages not listed above, check the Clarity
Getting Started Guide or visit our web pages
www.dataapex.com .
- 22 -