Clarity INT9 User Manual
Page 42
INT9 A/D converter
5 Troubleshooting
If your A/D card is not in the left-hand list Setup Control Modules, add it using the
Add button and repeat the previous step.
Note:
More information on the
System Configuration
dialog can be found in the
chapter "ClarityConfiguration" on pg 8.
Description:
c) You have a licence purchased for data collection from a smaller number of
Instruments:
Fig 41: Small number of Instruments purchased
Open the
System Configuration
dialog from the
Clarity
window using the System -
Configuration... command and check the tab of the corresponding Instrument -
Instrument X. Blue symbol of the curve in the tab header indicates that Instrument
is not usable for measuring.
Solution:
Check your serial number S/N for example using the command Help - About...
from the main
Clarity
window.
- 38 -