Features and, Benefits, Total care™ agitator – Kenmore 8526119A User Manual

Page 10: King size™ capacity, Ultra rinse system, Quiet pak™ ii system, Timed bleach dispenser, Wash/spin speeds, Water level and temperature, Awarning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

8

.

If the washer is not level, move the washer out slightly, tip

back, prop up the front of the washer with the wood block
and adjust the feet up or down as necessary. Repeat steps
5 through 8 until washer is level.

9. After the washer is in the final location and level, use a ®/is in.

(14 mm) open-end wrench to turn the nuts on the feet tightly
against the washer cabinet.

If the nuts are not tight against the washer cabinet, the
washer may vibrate.

1

.

2

.

3.

4.

5.

6

.

7.

Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. (See “Electrical Requirements.”)

Check to be sure all parts are now installed. If there is an
extra part, go back through the steps to see which step was
skipped.

Check to be sure you have all of your tools.

Check to be sure that the yellow shipping strap was removed
from the back of the washer and used to secure the drain
hose.

Dispose/recycle all packaging materials.

Check to be sure the water faucets are on.

Check for leaks around faucets and inlet hoses.

AWARNING

ti

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in

death, fire, or electrical shock.

8

.

Plug into a grounded 3 prong outlet.

9. Remove the protective film on the console and any tape

remaining on the washer.

10. Read “Washer Use” In the Washer User Instructions.

11. To test your washer, measure 1/2 of the normal

recommended amount of powdered or liquid detergent and
pour it into the washer basket or detergent dispenser (on
some models). Close the lid. Select any cycle, and then press
START. Allow it to complete one whole cycle.

FEATURES AND

BENEFITS

Your new washer has many special features that contribute to

proper cleaning and fabric care. Here are descriptions of the

features and their benefits:

TOTAL CARE™ Agitator
The TOTAL CARE™ Agitator moves in three directions to ensure

proper cleaning. At the bottom of your washer the agitator vanes
move back and forth to flex the fabric, loosening the soil. The
upper portion of the agitator has vanes that push the clothes
down in a spiraling pattern to the area of best cleaning action. A
“roll-over” motion displaces the clothes already at the bottom.
For your largest loads, the TOTAL CARE™ Agitator responds with
a vertical motion that senses the “large load” and guides items to

the bottom.

KING SIZE™ Capacity

Your washer can handle full-sized loads of heavy work clothes,
towels, or mixed items (see “Loading”). Loads with only a few

items can have a lower water level setting and need less wash

time.

Ultra Rinse System

Your washer allows you to add an automatic second rinse to the

Ultra Clean cycle and to the Permanent Press II cycle. Set the
Rinse Options control on 2nd rinse before you start the washer.

You can also select a “Rinse and Spin” option.

QUIET PAK™ II System

The QUIET PAK’’''^ System is designed to reduce water sounds

and ringing noises. The cabinet is insulated with three sound­
damping materials for superior vibration and sound-damping
characteristics.

Timed Bleach Dispenser
The liquid chiorine bleach dispenser automatically dispenses

bleach at the proper time in the cycle to ensure the cleanest and
brightest loads. The dispenser is for liquid chlorine bleach only.
Do not use this dispenser to add powdered chlorine or color-safe
bleach to your washer load.

Wash/Spin Speeds

Six combinations of speeds are provided for wash action (of
agitator) and spin motion (of basket). A Speeds selector control
knob lets you select a wash/spin speed for different types of

fabrics and soil levels.

Water Level and Temperature
A Water Level control gives you the flexibility to save water when
washing small loads. The Water Temperature control knob lets
you select a wash and rinse water temperature setting based on
the type of load you are washing. The settings for Automatic
Temperature Control (АТС) take away the worry of undissolved

detergent and ensure consistent cleaning results from season to
season with warm and cold washes.

10

Advertising