Using your range, Warning, Using the surface burners – Kenmore 665.75832 User Manual

Page 7: Using the eontrol knobs, Burner heat settings, Using power burner, Using suresimmer, Easy ways to save energy

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using Your Range

USING THE SURFACE BURNERS

^WARNING

M

l

Fire Hazard

Do not let the burner flame extend beyond

the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can
result in death or fire.

Using the eontrol knobs

Your range comes with electric ignitors that light
the burners each time you turn the control knobs
to LITE.

• Place a filled pan on the burner grate before

turning on the surface burner. Do not operate a

burner for extended periods of time without
having cookware on the grate.

• Push in the control knob and turn it

counter­

clockwise

to the LITE

position. The clicking
sound is the ignitor
sparking. Make sure
the burner has lit.

e

Stop the clicking

sound after the burner
lights by turning the
control knob anywhere

between HI and LO.

NOTE:

Do not try to light the surface burners

during a power failure. All four electric ignitors will
click at the same time. However, the burner with

the control knob turned to LITE is the one that will

ignite.

REMEMBER:

When range is in use or during

the Self-Cleaning cycle, the entire cooktop area

may become hot.

Burner heat settings

Use the following chart as a guide.

! SETTING

[

lite

I Power Burner

I (left front burner)

^---

IHI

i Mid-range

j

(between HI and

|LO)

RECOMMENDED USE________

• To light the burner.

• To provide highest heat

setting.

• To start food cooking.
• To bring liquid to a boil.

• To hold a boil.

• To fry chicken or pancakes.
• To cook gravy, pudding, or

icing.

• To cook large amounts of

vegetables.

LO

SURESIMMER

tm

setting

(right rear burner)

• To keep food warm.

• To simmer.

• To provide lowest

simmer/heat setting.

• To melt chocolate or butter.

NOTE:

Do not leave empty cookware, or cookware

which has boiled dry, on a hot surface burner. The
cookware could overheat, causing damage to the
cookware or cooking product.

Using Power Burner

The left front burner is designed to give ultra-high

power when it is fully on. It can be used to rapidly
bring liquid to a boil and to cook large quantities of

food.

Using SURESiMMER

The right rear SURESIMMER burner is designed for

low temperature cooking. It allows accurate simmer
control at the lowest setting.

Easy ways to save energy

• To help shorten your cooking time, use the least

amount of liquid possible.

• Start your food on a higher heat setting, then turn

the control to a lower setting to finish cooking.

Advertising
This manual is related to the following products: