To change the minute timer while it is in use, To set control for continuous baking, To set or change the temperature for baking – Kenmore 7861* User Manual

Page 10: To set the controls for baking, To set control for oven lockout, Setting oven controls, Cont’d)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Note: The indicator light located above the (S) pad will glow

while the minute timer is active.

Setting Oven Controls


Note: The minute timer does not start or stop cooking. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The minute timer can be used
alone or during any of theotheroven functions. When the
minute timer is in use with any other function, the minute
timer will be shown in the display. To view other functions,
press the pad for that function.

To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press


2. Press the yv or'V' pad to increase or decrease the

set temperature.

To Set

Control for Continuous Bake or 12

Hour Energy Saving

The oven control has a built-in 12 Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature forcontinuous baking.

To set control for continuous baking:

and hold the J\ or "V" to increase or decrease the time. 1. Press and hold (S) down for 5 seconds until tone is

To Cancel the Minute Timer before the set time has run

out: Press (§).

Note: To turn the time of day display OFF or ON in the

display press (©) and hold for 15 seconds (the control

will beep once) and then release.This feature does not

renriove the set time of day frorn the memory of the .

control. When the'display is turned OFF the time of day

pad is

will re-appear for a few seconds any time the f P

touched. ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■^^



heard, "--------hr" will appear in display for continuous

cooking. The current time of day will return to the

To cancel the Continuous Bake function, press (S)

and hold for 5 seconds until tone is heard. "12hr" will
appear in display indicating that the control has

returned to the 12 Flour Energy Saving feature.




To Set or Change the Temperature for Baking

The oven can be programmed to bake at any temperature
from 170°F to 550°F (77° C to 287°C).

To Set the Controls for Baking:

1. Press Bake, "---------- " appears in the display.

2. Within 5 seconds, press the W or "V . The display

will show "350°F (177°C)." By pressing and holding



A. or 'V', the temperature can then be adjusted

in 5°F increments (1 °C if the control is set to display

3. As soon as the yV or pad is released, the oven will

begin heating to the selected temperature. When the

displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF and
the control will beep 3 times.


Set Control for Oven Lockout

The control can be programmed to lock the oven doorand
lockout the oven control pads.
To set Control for Oven Lockout feature:

1. Press and hold for 3 seconds. “Loc” will appear in

display, the “Door Locked” indicator light will flash and
the motor driven door lock will begin to close
automatically. DO NOT open oven door while the

indicator light is flashing. Allow about 15 seconds for

the oven door to lock. Once the oven door is locked, the
current time of day will appear in the display.

2. To cancel the Oven Lockout feature, press (S)and

hold for 3 seconds. The control will unlock the oven

doorand resume normal operation.

Note: If any control padjs pressed while in the Oven
Lockout mode, “Loc”. will appear in the display until

the control pad is released.

4. To cancel baking, press (S).

To Change the Oven Temperature after Baking has

1. Press Bake and make sure the bake temperature is


This manual is related to the following products: