Kenmore 3948598A User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Load too wet

Did you use the right cycie for the load being washed?

Select a cycle with a higher spin speed (if available).

Did you use a cold rinse?

Cold rinses leave loads wetter

than warm rinses. This is normal.

Residue or lint on load

Did you sort properly?

Sort lint givers {towels, chenille) from

lint takers (corduroy, synthetics). Also sort by color.

Did you overload the washer?

The wash load must be

balanced and not overloaded. Clothes should move freely.
Lint can be trapped in the load if overloaded. Wash smaller

loads.

Did you select the correct water level?

The water level

should be correct for the load size. Clothes should move

freely in the water.

Did you use enough detergent?

Follow manufacturer’s

directions. Use enough detergent to hold the lint in the water.

Did you line dry your clothing?

If so, you can expect some

lint on the clothing.

■ Check the following:

Was paper or tissue left in the pockets?

Is your water colder than 60°F (15.6°C)7 Wash water colder

than 60°F (15.6°C) may not completely dissolve the

detergent.

Did you use the proper cycle time for the load? Reducing

wash time (duration) is another way to reduce lint.

^Аттю1тттштуттттт?л?ш£-т»штт^ттттлтттшттттшттттштттттттттттттттттттттттттт

Stains on load

Did you follow the manufacturer’s directions when adding

detergent and fabric softener?

Measure detergent and

fabric softener. Use enough detergent to remove soil and hold

it in suspension. Dilute fabric softener and add to the rinse
portion of a cycle only. Do not drip fabric softener on clothes.

Is there above average iron (rust) in water?

You may need

to install an iron filter.

Did you properly sort the load?

Sort dark clothes from

whites and lights.

Did you unload the washer promptly?

To avoid dye transfer,

unload the washer as soon as it stops.

Load is wrinkled

Did you unload the washer promptly?

Unload the washer

as soon as it stops.

Did you use the right cycle for the ioad being washed?

Use the cycle for Casual or Permanent Press clothes or
another cycle with low spin speeds (if available) to reduce

wrinkling.

Did you overload the washer?

The wash load must be

balanced and not overloaded. Loads should move freely
during washing.

Was the wash water warm enough to relax wrinkles, or
are you using warm rinses?

If safe for the load, use warm or

hot wash water. Use cold rinse water.

Are the hot and cold water hoses reversed?

Check that the

hot and cold water hoses are connected to the right faucets.
See the Installation Instructions.

Load is tangled or twisted

Did you overload the washer?

The wash load must be

balanced and not overloaded. Loads should move freely
during washing.

Did you wrap items around the agitator?

Drop items

iooseiy into the washer. Do not wrap items around the

agitator.

Gray whites, dingy colors

Did you properly sort the load?

Dye transfer can occur

when mixing whites and colors in a load. Sort dark clothes
from whites and lights.

Was the wash temperature too low?

Use hot or warm

washes if safe for the load. Make sure your hot water system
is adequate to provide a hot water wash.

Did you use enough detergent, or do you have hard

water?

Use more detergent for washing heavy soils in cold or

hard water.

Are the hot and cold water hoses reversed?

Check that the

hot and cold water hoses are connected to the right faucets.
See the Installation Instructions.

Garments damaged

Check the following:

Were sharp items removed from pockets before washing?
Empty pockets, zip zippers, snap or hook fasteners before
washing.

Were strings and sashes tied to avoid tangling?

Were items damaged before washing? Mend rips and broken
threads in seams before washing.

Did you overload the washer?

The wash load must be

balanced and not overloaded. Loads should move freely
during washing.

Did you add chlorine bleach properly?

Do not pour chlorine

bleach directly onto load. Wipe up bleach spills. Undiluted
bleach will damage fabrics. Do not place load items on top of

the bleach dispenser when loading and unloading the washer
(on some models).

Did you follow the manufacturer’s care label instructions?

15

Advertising