Cut out – Kenmore 415.1615111 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
CAUTION: When unpacking grill components, two people should raise grill head from the shipping box.
Bottom Shelf to Legs
□ Place bottom shelf end with
cut out
hole for LP cylinder between leg assembly with axle holes.
Attach to right and left leg assemblies with (4) 1/4-20x1-1/2" screws and (4) 1/4-20 flange nuts.
□ Tighten securely.
\
Match Holder
1/4-20 Flange nuts
Qty. 4
Left Leg Assembly
——
i
,
Axle hole
ii
1/4-20x1-1/2" Screws
Qty.
4
Right Leg Assembly
NOTE: One side panel
image has been
removed for clarity.
464220311 • 13
Advertising