FRIGIDAIRE FSEC/FSGC747GE User Manual
Bfrigidaire, Before operating your dryer operating steps, Temperature selection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BFRIGIDAIRE
OPERATING INSTRUCTIONS
FSEC/FSGC747GE
FSE/FSG747GE
DRY TEMPERATURE
KNITS/DELICATES
LOW HEAT
CYCLE SIGNAL
QUIET
OFF
2 - WAYTUMBLE AaiON DRYING
LOUD
TURN TO START
ON
AUTOMATIC
REGULAR
COOL
LESS
down
DRY
MORE
DRY,
PRESS SAVER
AUTOMATIC
PERM PRESS
TIMED
DRY
START
Before Operating Your Dryer Operating Steps
Read your dryer Owner's Guide.
It has important
safety and warranty information. It also has many
suggestions for best drying results.
A WARNING
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Owner's Guide
before operating this appliance.
•
During each cycle, the drum periodically reverses
direction. This reduces tangling and wrinkling.
•
A pause occurs when the drum reverses direction.
•
The clicking noise you may hear is the NORMAL
sound of the motor changing direction.
Printed in U.S.A.
Read
Drying Procedures
in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer.
If desired, add a dryer fabric
softener sheet.
4. .Close the dryer door.
5.
Set Dry Temperature and Cycle Signal
controls.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer.
Turn the Turn to Start control
clockwise to ON.
Hold for 1-2 seconds and
release.
8. When Cycle Signal control is on, a signal will
sound at the end of the cycle.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
K
Cut along this edge to separate English from other languages.
X
Temperature Selection
Always follow directions on fabric care labels.
A WARNING
To avoid fire hazard, do not use heat
to dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff-No Heat setting only.
The
REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT,
and
KNITS/DELICATES-LOW HEAT
temp
erature settings may be used with any cycle setting.
The
AIR FLUFF-NO HEAT
setting can be used only in
the Timed Dry cycle.
AIR FLUFF-NO HEAT
setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
(continued, reverse side)
P/N 131633100 (9609)