Kenmore 116.23637C - Manual (Page 6)

A
WARNING
Electrical Shock Hazard
DO NOT plug Into electrical supply
until assembly is complete. Failure to
do so could result in electrical shock or
Injury.
Before assembling your vacuum cleaner, be
sure you have all parts shown in PARTS
AND FEATURES.
Button
WANDS
Slide wands
together until wand
button snaps into
place. Turn wand
button to the slot­
ted area of the
wand swivel.
The swivel ailows
you to turn the
handle to the left
side to reach far­
ther under low fur­
niture.
POWER-MATE®
1. Insert wands into Power-Mate* until the
wand buttons snaps into place.
2. Connect Power­
Mate® plug and cord
as shown.
DO NOT
force. Raised area
of plug must be
toward hand.
Upper
Wand -
3. Secure cord into
cord holder on
wand swivel.
To remove: Step on wand release pedal,
then pull up on wands.
Wand
Button
Wand
Swivel
Lower
Wand
Wand
Button
Wand Quick
Release Pedal