Adjusting rotary controls, Hie ice dispen, Awarning – Kenmore 10653094300 User Manual

Page 11: Ifeiter and ice dispensers, Mocieisl

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled compietely, your
food may spoil.

MOTE: Adjusting the Refrigerator and Freezer Controis to a
higher (colder) setting wili not cool the compartments any

faster.

The preset settings shouid be correct for normal household

usage. The controls are set correctly when milk or juice is as

coid as you iike and when ice cream is firm.

If the temperature is too warm or too cold in the refrigerator or

freezer, first check the air vents to be sure they are not

blocked before adjusting the controls.

Adjusting Rotary Controls

If you need to adjust temperatures, adjust the refrigerator

temperature first.

NOTE: Wait at ieast 24 hours between adjustments and then

recheck the temperatures.

CONDITION/REASON;

SETTING
ADJUSTMENT:

REFRIGERATOR too cold

Not set correctly for your
conditions

REFRIGERATOR
Control one setting
lower

REFRIGERATOR too warm

Door opened often, large amount of

food added or room temperature
very warm

REFRIGERATOR
Control one setting
higher

FREEZER too cold

Not set correctly for your
conditions

FREEZER Controi one
setting lower

FREEZER too warm/too little ice

Door opened often, or large amount
of food added or very cold room

temperature (can’t cycle often

enough) or heavy ice usage

FREEZER Control one
setting higher

Ifeiter and Ice Dispensers

(on

some

mocieisl

AWARNING

Cut Hazard

Use a sturdy glass when dispensing ice or water.

Failure to do so can result in cuts.

Depending on your modei, you may have one or more of the

foiiowing options: the abiiity to select either crushed or cubed

ice, a special light that turns on when you use the dispenser, or a
lock option to avoid accidental dispensing.

Hie ice dispen

ice dispenses from the ice maker storage bin in the freezer. When

the dispenser lever is pressed;

■ A trap door opens in a chute between the dispenser and the

ice bin. Ice moves from the bin and falls through the chute.

■ When you release the dispenser iever, the trap door cioses

and the ice dispensing stops. The dispensing system wili not
operate when the freezer door is open.

Some models dispense both cubed and crushed ice. Before
dispensing ice, seiect which type of ice you prefer. The button
controis are designed for easy use and cleaning.

■ For cubed ice, press the CUBE button until the red indicator

appears in the window above the CUBE button.

ICE

CRUSH CUBE

■ For crushed ice, press the CRUSFI button untii the red

indicator appears in the window above the CRUSH button.

For crushed ice, cubes are crushed before being dispensed. This
may cause a siight deiay when dispensing crushed ice. Noise

from the ice crusher is normai, and pieces of ice may vary in size.
When changing from CRUSH to CUBE, a few ounces of crushed

ice wili be dispensed along with the first cubes.

11

Advertising
This manual is related to the following products: