Temperature is too warm, There is interior moisture buildup, The doors will not close completely – Kenmore 10653094300 User Manual

Page 22: Hie doors are difficult to open, Computer troubleshooting (on some models), Protection, Agreements, Master protection agreements, Protection agreements

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Temperature is too warm

Are the air vents blocked in either compartment? This

prevents the movement of cold air from the freezer to the

refrigerator. Remove any objects from in front of the air vents.
See the “Ensuring Proper Air Circulation” section for the

location of air vents.

Are the door(s) opened often? The refrigerator will warm
when this occurs. Keep the refrigerator cool by getting al!

items out at one time, keeping food organized, and dosing

the door as soon as possible.

Has a large amount of food Just been added to the

refrigerator or freezer? Adding a large amount of food
warms the refrigerator. It can take several hours for the
refrigerator to return to the normal temperature.

Are the controls set correctly for the surrounding
conditions? See the “Using the Controls” section.

Is the refrigerator not cooling? For models with digital

controls, turn the unit OFF then ON again to reset. See the

“Using the Controls” section. If this does not correct the

problem, call for service.

There is interior moisture buildup

Are the air vents blocked in the refrigerator? Remove any
objects from in front of the air vents. See the “Ensuring

Proper Air Circulation” section for the location of air vents.

Are the door(s) opened often? Avoid humidity buildup by
getting all items out at one time, keeping food organized, and
closing the door as soon as possible.

Is the room humid? It is normal for moisture to build up
inside the refrigerator when the room air is humid.

Is the food packaged correctly? Check that all food is

securely wrapped. Wipe off damp food containers before

placing in the refrigerator.

Are the controls set correctly for the surrounding
conditions? See the “Using the Controls” section.

Was a self-defrost cycle completed? It is normal for
droplets to form after the refrigerator self-defrosts.

The doors will not close completely

Are food packages blocking the door open? Rearrange
containers so that they fit more tightly and take up less
space.

Is the ice bin or ice bucket out of position? For models

with an interior ice bin, push the ice bin in all the way. If the

ice bin does not go in all the way, it may not be put in straight.
Pull it out and try again. For models with an ice bucket
located on the freezer door, the bucket should sit level. To

remove the bucket, press the release button on the right side
of the bucket and lift straight up. Replace the bucket in the
door making sure it is properly aligned and snapped securely

into place. See the “Ice Maker and Storage Bin/Bucket”

section.

Are the pans, shelves, bins, or baskets out of position?

Put the crisper cover and all pans, shelves, bins, and baskets
back into their correct positions. See the “Convertible

Vegetable/Meat Drawer, Crisper and Covers” section for more

information.

Are the gaskets sticking? Clean gaskets according to the
directions in the “Cleaning” section.

Does the refrigerator wobble or seem unstable? Level the
refrigerator. See the “Door Closing” or “Leveling Refrigerator”
section, depending on your model.

Were the doors removed during product installation and

not properly replaced? Remove and replace the doors
according to the “Door Removal” section on some models, or
call a qualified service technician.

Hie doors are difficult to open

Are the gaskets dirty or sticky? Clean gaskets according to
the directions in the “Cleaning” section.

Computer Troubleshooting (on some models)

See the “Computer and Software User Guide” for information
regarding your computer system.

PROTECTION

AGREEMENTS

Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore® appliance is designed and manufactured for years of
dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That’s when
having a Master Protection Agreement can save you money and
aggravation.

Purchase a Master Protection Agreement now and protect
yourself from unexpected hassle and expense.

The Master Protection Agreement also helps extend the life of
your new appliance. Here’s what’s included in the Agreement:

✓ Expert service by our 12,000 professional repair specialists

✓ Unlimited service and no charge for parts and labor on all

covered repairs

✓ “No-lemon” guarantee - replacement of your covered

product if four or more product failures occur within twelve
months

✓ Product replacement if your covered product can’t be fixed

Annual Preventive Maintenance Check at your request - no

extra charge

Fast help by phone - phone support from a Sears technician

on products requiring in-home repair, plus convenient repair
scheduling

✓ Power surge protection against electrical damage due to

power fluctuations

✓ Rental reimbursement if repair of your covered product takes

longer than promised

22

Advertising
This manual is related to the following products: