Care and cleaning, Glass-ceramic cooktop cleaning – Kenmore 911.94752 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CARE AND CLEANING

Glass-Ceramic Cooktop
Cleaning

On models with white or bisque
glass-ceramic, it is ncrmai for the
surface to appear discolored when

cooking zones are hot This is

temporary and will disappear

as the glass cools Cleaning a
glass-ceramic cooktop is different
from cleaning a standard porcelain
cooktop. To maintain and protect your

glass-ceramic cooktop, follow these
basic steps

Use only Cooktop Cleaning Creme®
on glass-ceramic.

Normal dally use cleaning;

To maintain and protect your giass-
ceramic cooktop follow these basic

ctoncj

1. Before using the cooktop for the

first time, clean it with the Cooktop
Cleaning Creme®, This helps

protect the top and makes clean-up
easier,

2. Daily use of the cooktop cleaning

creme will help keep the cooktop
looking new

3. Shake the cleaning creme well

Apply a few drops of the creme
directly to the cooktop

4. Use a paper towel or sponge to

dean the entire cooktop surface

NOTE: It is very important that you
DO NOT heat the cooktop until it has
been cleaned thoroughly.

Clean your cooktop after each spill

Burned on residue:

WARNING: DAMAGE to your glass

surface may occur if you use scrub
pads other than BLUE Scotch-Brite®
Multi-Purpose No Scratch scrub
sponges by 3M,

1. Allow the cooktop to cool

2. Spread a few drops of Cooktop

Cleaning Creme® to the entire
burned residue area

3. Using the scrub sponge, rub the

residue area, applying pressure
as needed.

4. If any residue remains, repeat the

steps listed above as needed,

5. For additional protection, after all

residue has been removed, polish
the entire surface with Cooktop
Cleaning Creme® and a paper
towel.

Heavy, burned on residue:

1. Allow the cooktop to cool

2. Spread a few drops of Cooktop

Cleaning Creme® to the ¿ntire
burned residue area

3. Hold the razor scraper at

approximately a 45° angle against
the glass surface and scrape the
soil It will be necessary to apply
pressure to the razor scraper in
order to remove the residue.

NOTE: The razor scraper is not
supplied with your product

4. Keep a small amount of creme on

the residue as you scrape.

25

Advertising
This manual is related to the following products: