Operating instructions, Cycle selection, For best results – Kenmore 417.8413 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operating Instructions

This manual covers many models and not all cycles, options, or features listed are available on every model. Screen images
shown are for reference only. Your model may differ.

Cycle Selection

Press the

POWER

button turn on the unit. Use the

touch screen to select the desired cycle. To scroll

through the cycles 1) press the left or right arrow, 2)

“press and drag” the list or 3) “touch and flick” the

list. Touch the desired cycle to select it. The selected

cycle will be highlighted.

To change the cycle once the cycle has begun, press

PAUSE

then

CANCEL,

select a new cycle, and press

► START

again.

SCREEN DISPLAY MODES

Standy Mode

- after 5 minutes of inactivity LCD

backlight goes down to 10%. Touching the screen

brings back the backlight to the user settings.

Sleep Mode

- after 25 minutes of inactivity from

Standby, the LCD turns completely off. To wake up

LCD press

POWER.

f.tteam

V.l>:ed

Ptrfresh Lo

Touch Up

Duty

'

N..

m

For best results

Follow the fabric care label instructions on

items to be dried.

Aulo Dry Cycles

Auto Dry cycles take the guesswork out of selecting the

correct drying time for each load. Moisture sensing bars at

the back of the dryer drum sense the moisture level of the

load as it tumbles through the heated air. With Auto Dry

cycles, the load will automatically be dried at the selected

temperature to the desired dryness level.

Auto Dry cycles save time and energy and protect fabrics.

When the load has reached the selected dryness level, it

will continue to tumble during a cool down period. This

helps reduce wrinkling and makes items easier to handle

during unloading.

Drying time varies depending on size and dampness of

load and fabric type. If the load is too small or almost dry,

the moisture sensing bars may not detect enough moisture

to continue the cycle and the cycle may end after a few

minutes. If this occurs, select a Timed Dry cycle.

Room temperature and humidity, type of installation and

electrical voltage or gas pressure can also affect drying

time.

Normal

Select this cycle to dry everyday fabrics including cot­

tons, linens and sheets.

Heavy Duty

Select this Auto Dry cycle to dry durable fabrics such as

heavily soiled jeans and overalls.

Towels

Select this cycle to dry heavy loads such as towels and

non-rubber-backed bath mats.

Advertising
This manual is related to the following products: