Drain & spin, Ciean washer, 2nd rinse – Kenmore HE2 PLUS User Manual

Page 17: Cycle signal, Wash/rinse temp

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Drain & Spin

Prewash

Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to high. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and
woolens should be drained with no spin or low spin to avoid

fabric stress.

To use Drain & Spin setting

■ Select RINSE/DRAIN & SPIN cycle.

Press the 2ND RINSE button to deselect the rinse option.

Press START.

Ciean Washer

Use the Clean Washer cycle once a month to keep the inside of

your washer fresh and clean. This cycle uses a higher water level

in combination with liquid chlorine bleach to thoroughly clean the
inside of your washing machine. See “Cleaning Your Washer.”

IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer cycle. Use this cycle with an empty
wash drum.

As with any new product, you will hear sounds that you are not
aocustomed to. You may hear various sounds when the door is

locked or unlocked, and during the washing, rinsing, or spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation. See “Troubleshooting.”

You can customize your wash by adding Options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.

o

o

Prewash

2nd Rinse

a Cycle Signal

See the “Laundry Guide” section for an overview of possible
options for each Wash Cycle selection.

If an option is available with a selected cycle, the light for that
option will illuminate when selected.

If an option is unavailable with a selected cycle, there will be a
short tone and the light for that option will not illuminate when
selected.

Use this option for loads of heavily soiled garments that need
pretreatment.

■ Add detergent to the Main Wash Compartment of the

dispenser drawer.

This option adds tumbling time prior to the selected main cycle.
The washer continues automatically from prewash into the main
wash cycle.

2nd Rinse

A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the Normal rinse.

Cycle Signal

This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OEF.

Preset cycle settings of Water Temperature, Spin Speed, and
Rinse Options can be changed. You can change a modifier after
starting a cycle anytime before the selected Modifier begins. Not
all Modifiers are available with all options and cycles.

Auto Temp Control

^ Hot / Cold

)High

) Medium

) Low

I Warm/Warm

jWarm / Cold

) Cold/Cold

O O

Spin Wash / Rinse

Speed Temp

■ To change the spin speed, select the SPIN SPEED button

until the desired setting illuminates.

■ To change the water temperature, select the WASH/RINSE

TEMP button until the desired setting illuminates.

Wash/Rinse Temp

Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.

17

Advertising
This manual is related to the following products: