Front panel, M power on/off, 3 edit/no – Pioneer MJ-D508 User Manual
Page 12: 3 name (pp.32-33), 3 digital rec level, 1 analog rec level (p.20), 3 digital nr (p.18, 21, 42), 01 a-b(p.22,39), 0 name clip (p.34), 0 display/chara
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Front Panel
m POWER ON/OFF
Switches power to the unit on and off.
[2] TIMER (REC/OFF/PLAY) (p.26,31)
Switches the timer mode between timer-controlled
recording, timer-controlled playback, and timer off.
a INPUT SELECTOR (p.19,20,42)
Switches between the analog, optical digital and
coaxial digital inputs.
H] DACMODE (pp.42-43)
Press to switch on/off the
DAC
function.
[
5
]
MD loading slot
[3 EJECTS
Press to eject a disc from the recorder.
[7]
REC/PLAY MODE (p.24, 25, 26, 27, 29, 30)
Press to access various record and playback options.
3 EDIT/NO.
Press to access various editing features.
3
NAME (pp.32-33)
Press to enter and exit the disc/track naming process.
3 DIGITAL REC LEVEL /
Multifunction control used to set the digital recording
level (p.27), skip time/tracks (pp.16-17), choose
between different menu options, and select charac
ters in disc/track naming mode (pp.32-33). Push to
confirm selections.
[1 ANALOG REC LEVEL (p.20)
Use to set the recording level when the analog inputs
are used.
3 DIGITAL NR (p.18, 21, 42)
Press to switch digital noise reduction on/off during
playback or recording.
01
A-B(p.22,39)
Use to set a start point and an end point to mark a
section of the disc for editing or repeat play.
0 NAME CLIP (p.34)
Press to copy the current disc or track name to the
recorder's memory.
0
DISPLAY/CHARA
Press to switch between display modes (elapsed
time, time remaining, etc.) (p.l8), and between upper
and lower-case characters in disc/track naming mode
(pp.32-33).
01
Remote control sensor
Picks up the infrared signals from the remote control
unit.
0
Display (p.13)
01
◄◄ and ►► (p.17)
Press and hold for fast-reverse and fast-forward
playback.
0 ► (p.15)
Press to start playback, (or recording)
a SYNCHRO REC (p.21)
Press to enter synchronous recording mode: recording
starts when the recorder senses an input signal.
3 II
Press to pause playback or recording.
Press to stop playback or recording.
• (pp.19-20)
Press to put the recorder into record-pause mode.
PHONES jack
Phones LEVEL
Use to raise or lower the headphone volume level.
<PRB1285>