Casio G'zOne Ravine - Manual (Page 130)

129
SETTINGS & TOOLS
4. To change the tool displayed on the front display, press the Bottom
Side Key  to unlock the side keys of handset, then press the
Volume Keys
 up or down.
5. To end G’zGEAR ® mode, press and hold the Bottom Side Key .
NOTES
If the handset is closed while displaying the G’zGEAR ® tool on the
main display, the tool will be displayed on the front display.
On the front display, the following information is displayed for
each tool:
Earth Compass: Compass
Walking Counter: Steps, burned calories
Thermometer: Temperature in Celsius and Fahrenheit
Tides: Time of high tide, time of low tide
Sunrise Sunset: Time of sunrise, time of sunset
Astro Calendar: Phase of the Moon
Star Gazer: Star constellations at random
•
•
Set Up
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Tools.
2. Select G’zGEAR, then press the Center Select Key [OK],
Setup.
3. Select one of the following options:
G_SWITCH: Enables switching of tools by shaking the handset
to the left with the flip open. See page 35 for information on the
Motion Detection function. (On/Off)
Save Last Mode: Displays the previously displayed mode when
starting a tool. (On/Off)
Backlight: Keeps the display backlight on while G’zGEAR ® is
active. (On/Off)