Digit dial readout, Service alerts, Power on/off – Casio G'zOne Ravine User Manual

Page 144

Advertising
background image

143

SETTINGS & TOOLS

Digit Dial Readout

To set whether the handset reads out digits entered when dialing a

phone number:

1.

From idle mode, press the Center Select Key [MENU], select

Settings & Tools, then press the Center Select Key [OK]. Press

Sounds Settings,  Digit Dial Readout.

2.

Select On or Off, then press the Center Select Key [SET].

Service Alerts

To set any of the three Alert options to either On or Off:

1.

From idle mode, press the Center Select Key [MENU], select

Settings & Tools, then press the Center Select Key [OK]. Press

Sounds Settings, Service Alerts.

2.

Select one of the following options, then press the Center Select

Key [OK].

ERI: Alerts you to the status of cellular service.

Minute Beep: Alerts you every minute during a call in progress.

Call Connect: Alerts you when the call is connected.

Software Update: Alerts you when the software is updated.

3.

Select On or Off, then press the Center Select Key [SET].

Power On/Off

To set the handset to sound a tone when the handset is powered on/off:

1.

From idle mode, press the Center Select Key [MENU], select

Settings & Tools, then press the Center Select Key [OK]. Press

Sounds Settings, Power On/Off.

2.

Press

 Power On or  Power Off.

3.

Select On or Off, then press the Center Select Key [SET].

Advertising