Pioneer PDP-503HDE - Manual (Page 53)

Useful adjustment settings
Colour system setting (AV mode only)
You can change the colour system to one that is
compatible with the image on the screen.
1 Press MENU
2 Press A/T to select “Option”, and then press
ENTER.
3 Press A/V to select “Colour Sys.”, and then press
ENTER
4 Press A/T to select a compatible video signal
system of your equipment, and then press ENTER.
5 Press MENU to exit the menu.
NOTE > * •
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour systems for each channel
are automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• Return to the previous menu by pressing o^-
Mode selection for the INPUT 1 to 4 terminal
AV SELECTION: STANDARD
AV SELECTION: DYNAMIC
AV SELECTION: MOVIE
AV SELECTION: GAME
AV SELECTION: USER
Mode selection for the PC terminal
AV SELECTION: STANDARD
AV SELECTION: USER
AV selection
AV selection gives you five viewing options to choose
from to best match the Plasma Display System
environment, which can vary due to factors like room-
brightness, type of programme watched or the type of
image input from external equipment.
1 Press AV SELECTION
• Present AV selection mode displays.
2 Press AV SELECTION again before the mode
displayed on the screen disappears.
• The mode changes as shown left.
Selected Item Description
STANDARD
For a highly defined image in a normally
bright room
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
MOVIE For a movie
GAME
Lowers image brightness for easier viewing
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
)-50