Canon A460 - Manual (Page 29)

27
D
ow
nloa
di
ng
Im
ag
es
to a C
om
pu
te
r
2.
Connecting the camera to a computer.
1. Use the supplied interface cable to connect the computer’s
USB port to the camera’s DIGITAL terminal.
Slip your fingernail under the edge of the camera’s terminal
cover, lift it open and plug the interface cable in all the way.
2. Turn the camera’s mode dial to
(playback) and turn on the power.
The camera and computer will be able
to communicate.
Always grasp the sides of the connector when
disconnecting the interface cable from the camera’s
DIGITAL terminal.
USB Port
Interface Cable
DIGITAL Terminal
Interface Cable
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the
computer when you attach the camera and open a connection.